Technical Resources

Checking Corrugated Box Strapping Specifications for an Inline Automatic Strapping Machine

Review the corrugated box strapping specifications of the AMB 1500 S/T, from minimum and maximum dimensions to the standard height. Key considerations include the minimum width for dual strapping and conditions that require design modifications.

Checking Corrugated Box Strapping Specifications for an Inline Automatic Strapping Machine

Some scene illustrations in this article are AI-generated to aid understanding. The equipment photographs show actual JS SYSTEM machines.

If your shipping specification sheet includes both small and large boxes, both sizes need to be considered when evaluating strapping equipment. For factories that manufacture and ship corrugated boxes, production item dimensions and the equipment’s strapping range are key criteria for evaluating a purchase.

Designed and manufactured directly by JS SYSTEM, the AMB 1500 S/T is an inline automatic PP strapping machine that secures bundles of finished corrugated boxes with PP straps. It is intended for bundling operations at factories that manufacture and ship corrugated boxes.

This article covers minimum and maximum dimensions, height, and the required strapping methods in sequence. Distinguishing standard specifications from items requiring a separate design review helps you communicate specific factory conditions during a quotation consultation.

Checking Minimum and Maximum Box Dimensions

First, compare the smallest and largest corrugated boxes you produce against the equipment specifications. The AMB 1500 S/T accommodates box dimensions from a minimum of 400×200mm to a maximum of 1,500×1,300mm.

The minimum dimensions can be used to evaluate suitability for smaller items, while the maximum dimensions can be used to evaluate suitability for larger items. Business owners and plant managers can use these limits to discuss the range of production items they intend to process.

From Minimum|to Maximum Dimensions

A width of 1,600mm is also possible. This width should be discussed separately from the stated maximum dimensions of 1,500×1,300mm. Factories handling boxes with a width of 1,600mm should provide the box dimensions and confirm factory conditions during a quotation consultation.

The specifications being reviewed here apply to the finished corrugated boxes themselves. The AMB 1500 S/T is bundling equipment that straps finished boxes together in bundles, rather than a packaging machine that places products inside boxes.

Checking the Standard Box Height

After the dimensional range, the next item to review is box height. The standard box height for the AMB 1500 S/T is 350mm. Discussing width and height separately makes it clear which dimension each request concerns.

A box height of 400mm requires some design modifications. For factories planning to process boxes with a height of 400mm, this height is a design modification request. At this stage, the key consideration is to distinguish the standard height from the requested modification.

Standard Height and|Design Modifications

Reviewing height is a way to incorporate the factory’s desired operating conditions into design discussions. When production personnel provide the height of the items they intend to process, business owners and plant managers can discuss which production requirements call for design modifications.

JS SYSTEM directly handles design, manufacturing, and after-sales service in Korea. Height modification requests can be discussed with the manufacturer responsible for design and manufacturing, and after installation, the manufacturer’s engineers also provide after-sales service directly.

Can Small Boxes Also Be Secured with Two Straps?

After reviewing box dimensions and height, the required strapping method should also be considered. Dual strapping applies 2 straps simultaneously and has a minimum width of 200mm. The ability to secure small boxes with 2 straps is a relevant consideration when reviewing these specifications.

Single strapping is an option for items that require a single strap. This method secures a bundle with 1 strap. Specifying the desired number of straps along with the small box dimensions helps you communicate the required strapping configuration during consultation.

Two-Strap Bundling|for Small Boxes

Offset strapping applies a strap at a position specified by the user. There are four strapping modes: dual strapping, single strapping, offset strapping, and automatic setup. Items requiring specific strap positions as well as a particular number of straps can also be included in the consultation.

Automatic setup is a function linked to box dimension entry. When box dimensions are entered on the touchscreen, the strapping position, tension, and speed are set automatically. This delivers consistent strapping quality regardless of operator skill level, allowing you to evaluate how box specifications are applied in operation.

Checking Size Changeovers and Installation Requirements

While the dimensional range is a criterion for evaluating a purchase, size changeovers concern the actual operating method. When box sizes change, the AMB 1500 S/T sets itself up automatically through a touch panel selection, saving 10~30 minutes compared with manual adjustment.

If your factory produces multiple box sizes, you can include the size changeover process in purchase discussions alongside the list of dimensions to be processed. Production personnel can use this function as a basis for comparing current manual adjustment procedures with touch panel selection.

Touch Panel Selection|Automatic Setup

The equipment connects inline to an existing conveyor line. Its conveyor speed can be adjusted independently to match the line speed, so consultation information should include the existing line configuration and throughput alongside box dimension requirements.

The information needed for an accurate quotation includes line configuration, box dimensions, and throughput. Adding height modification requests and the required strapping modes helps explain your factory’s production requirements in specific terms. Detailed factory conditions are confirmed during the quotation consultation.

Actual JS SYSTEM AMB 1500 S/T Equipment

Frequently Asked Questions

Q. Can boxes with a width of 1,600mm also be strapped?

A width of 1,600mm is also possible. Provide the dimensions of the boxes you intend to process so that factory conditions can be confirmed during the quotation consultation.

Q. Is a box height of 400mm standard?

The standard box height is 350mm. A height of 400mm requires some design modifications and should therefore be included in the design consultation.

Actual JS SYSTEM AMB 1500 S/T Equipment

Q. What is the minimum width for applying two straps simultaneously?

The minimum width for dual strapping is 200mm. Small boxes can also be secured with 2 straps, and dual strapping is the mode that applies 2 straps simultaneously.

When evaluating a purchase, first define the range of boxes you intend to process, then specify height-related design requests and strapping methods in sequence. Separating questions about standard specifications from requests for modifications makes the purpose of the consultation clear.

Strapping Specifications at a Glance

JS SYSTEM discusses factory conditions based on the AMB 1500 S/T, which it designs and manufactures directly. Quotation inquiries are accepted through the website inquiry form, with a response within 1~2 business days.

28cycles/min
Korea's First Full-Servo Auto-Setting

Automatic Inline Strapping —
See It in Action

AMB 1500 S/T
28 cycles/min, 40% energy savings.
Designed, built & serviced — all in-house.

Request a Quote