Technical Resources

Inline Automatic Strapping Machine: How to Choose Among Four Inline Strapping Modes

Review dual strapping, single strapping, offset strapping, and automatic setup on the AMB 1500 S/T based on box size and strapping position. This guide also explains the minimum width for dual strapping alongside box size and height specifications.

Inline Automatic Strapping Machine: How to Choose Among Four Inline Strapping Modes

Some scene illustrations in this article are AI-generated to aid understanding. Equipment photographs show actual JS SYSTEM machines.

Imagine an operator determining strapping positions in front of bundles of corrugated boxes awaiting shipment. The operator reviews which bundles need two straps, which need one, and which jobs require a manually specified strapping position.

The criteria for selecting a mode are box size and strapping position. Dual strapping, single strapping, offset strapping, and automatic setup on the AMB 1500 S/T address these different job requirements.

Designed and manufactured directly by JS SYSTEM, this inline automatic PP strapping machine bundles finished corrugated boxes with PP straps. It secures box bundles into shipping units at factories that manufacture and ship corrugated boxes.

One Strap or Two?

The first item for the operator to check is the number of straps required per bundle. Dual strapping applies 2 straps simultaneously, while single strapping applies 1 strap. Specifying whether outgoing box bundles require one strap or two makes mode selection more straightforward.

For operators considering two straps on small boxes, the minimum dual-strapping width of 200mm provides a basis for evaluation. Providing actual box dimensions along with the required number of straps helps communicate application requirements clearly to the manufacturer.

Dual: Two Straps|Single: One Strap

This PP strapping machine uses standard PP straps. It straps the corrugated boxes themselves. It is bundling equipment that secures finished boxes into bundles, rather than a packaging machine that places products inside boxes.

The machine connects inline with an existing conveyor line. Conveyor speed can be adjusted independently to match line speed. Box conveying and strapping speeds are also adjustable, so production line speed requirements are considered alongside the strapping mode.

Do You Need to Specify the Strapping Position?

Offset strapping is used for jobs that require a strap at a particular position. This mode straps at a user-specified position. It distinguishes requirements for strap placement from requirements for the number of straps.

The PP strap hangs like a curtain from the top of the arch to below the conveyor, angled approximately 45 degrees toward the discharge direction. The bundle pushes into this strap, which wraps around its front, top, and bottom.

Strapping at a|User-Specified Position

Immediately after the entire bundle passes through, the joining head descends along the bundle's trailing face to conveyor height. It engages the lower strap and automatically joins the strap ends. The joint is made at conveyor height near the bottom of the trailing face, rather than on top of the boxes.

Here, the trailing face means the end opposite the leading end in the direction of travel. The user-specified strapping position describes the mode, while the location where the head joins the strap describes the operating mechanism. Factory-specific application conditions are confirmed during a quotation consultation.

Is Setup Automatic When Box Sizes Change?

Automatic setup is also included among the four strapping modes offered by the AMB 1500 S/T. Entering the box size on the touchscreen automatically sets the strapping position, tension, and speed.

The AMB 1500 S/T uses genuine Korean-made LS servo motors and simultaneously controls 9 servo axes. Precise servo control ensures uniform strapping tension. Pneumatic systems may produce uneven strapping quality due to variations in tension.

Enter the Size for|Automatic Setup

This function incorporates Korea's first automatic setup technology with full servo control. It delivers consistent strapping quality regardless of operator skill. Alongside mode selection, the setup method provides another basis for evaluating the equipment.

When box sizes change, a selection on the touch panel initiates automatic setup, saving 10~30 minutes compared with manual adjustment. This figure represents the difference in adjustment time during box size changeovers. Production managers evaluate automatic setup in the context of these changeover tasks.

Checking Box Size and Height

The supported box size ranges from a minimum of 400×200mm to a maximum of 1,500×1,300mm. The minimum dual-strapping width described earlier is a specification for applying two straps. The box size range and the width requirement for the strapping mode are separate specifications.

The standard box height is 350mm. A height of 400mm requires some design modifications, so factories requiring this height should include it in their quotation consultation. This information ensures that height requirements are included in the design review.

Box Size and|Height Requirements

A width of 1,600mm is also possible. Factories considering this size should provide the box height and desired strapping position along with the width during consultation.

Machine dimensions are 2,100×2,600×1,900mm, and weight is approximately 1,500kg. Box width, length, and height specify the items to be strapped, while machine dimensions specify the installation space required. These installation specifications are also considered when discussing the line configuration.

Actual JS SYSTEM AMB 1500 S/T Equipment

Frequently Asked Questions

Q. Can the machine be installed where space beside the line is limited?

The S in AMB 1500 S/T denotes the side-feed configuration, which supplies PP strap from the side. T denotes the top-feed configuration, which supplies strap from above and is recommended when space beside the line is limited. Both models have the same basic specifications and performance.

Q. Is strapping speed based on the number of boxes?

The maximum rate of 28 bundles per minute (28 cycles) refers to the number of strapped bundles. It does not refer to the number of individual boxes. Actual throughput is confirmed after testing with box samples and conducting line integration tests.

Actual JS SYSTEM AMB 1500 S/T Equipment

Q. When will I receive a response to a quotation inquiry?

Submit your inquiry through the website form, and you will receive a response within 1~2 business days. The website also features footage of the equipment operating on an actual production line, available as a 60-second highlights video and a full 9-minute 31-second video.

For an accurate quotation, please provide your line configuration, box size, and required throughput when requesting a consultation. Including the desired number of straps and their positions ensures that the consultation covers the job requirements relevant to mode selection.

Strapping Modes at a Glance

JS SYSTEM handles design, manufacturing, and after-sales service directly in Korea. With after-sales service provided directly by the manufacturer's engineers, the company supports equipment adoption at factories that manufacture and ship boxes. Its promise is: “The people who build it take responsibility to the end.”

28cycles/min
Korea's First Full-Servo Auto-Setting

Automatic Inline Strapping —
See It in Action

AMB 1500 S/T
28 cycles/min, 40% energy savings.
Designed, built & serviced — all in-house.

Request a Quote