
Some scene illustrations in this article are AI-generated to aid understanding. The equipment photographs show actual JS SYSTEM machines.
For corrugated box factories evaluating equipment, we compare pneumatic drives that require a compressor with direct servo drives. This comparison covers strapping machines that secure bundles of finished corrugated boxes with PP straps to form shipping units.
Business owners, plant managers, and production personnel evaluating strapping machine compressor power need to compare drive systems, power consumption, leakage losses, and wear parts. Each section pairs an explanation of pneumatic system design with the corresponding servo-driven product description.
Designed and manufactured directly by JS SYSTEM, the AMB 1500 S/T is an inline automatic PP strapping machine. This article covers equipment that straps bundles of finished corrugated boxes, rather than equipment that packs products into boxes.
Does the drive system require a compressor?
Pneumatic strapping machines require a 15~30kW compressor. Because the drive system uses compressed air, a compressor is included in the equipment configuration.
The AMB 1500 S/T uses a servo direct drive that requires no compressor. Its direct drive by servo motors is the key distinction from pneumatic systems.

The AMB 1500 S/T uses genuine Korean-made LS servo motors and simultaneously controls 9 servo axes. In addition to the drive system, the product specifications identify the motors used and the number of controlled axes.
The AMB 1500 S/T connects inline to an existing conveyor line. Conveyor speed is independently adjustable to match the line speed. Box conveying and strapping speeds are also adjustable, so speed settings are addressed when integrating the machine into an existing line.
Checking Power Consumption and Power Supply Specifications
The AMB 1500 S/T consumes approximately 4kW. The kW rating given earlier for the pneumatic system refers to the compressor specification, while this figure refers to the strapping machine's power consumption.
The servo-driven AMB 1500 S/T reduces power consumption by 30~40% compared with pneumatic systems. The preceding kW figures refer to the compressor and the machine respectively; the product's stated energy savings are 30~40%.

The power supply is 220V 50/60Hz. Power consumption describes the electricity used by the machine, while the power supply specifications describe the supply voltage and frequency. These provide specific electrical requirements for the equipment alongside its energy-saving performance.
The specified throughput is up to 28 bundles per minute. This counts strapped bundles, not individual boxes. One strapping cycle takes 2.1 seconds with the automatic inline AMB 1500 S/T, compared with approximately 10 seconds for manual work.
Are there compressed air leakage losses?
Air leaks in pneumatic systems result in compressed air leakage losses. The direct servo drive of the AMB 1500 S/T has no such losses.
The 30~40% power savings describe energy performance compared with pneumatic systems. The absence of compressed air leakage losses describes a structural feature of the servo direct drive: no compressed air is lost through air leaks.

Servo control also regulates strapping tension. Tension variations in pneumatic systems can lead to inconsistent strapping quality. The AMB 1500 S/T uses precise servo control to maintain uniform strapping tension.
Korea's first fully servo-controlled automatic setup system automatically sets strapping position, tension, and speed when box dimensions are entered. It delivers consistent strapping quality regardless of operator skill. When changing box sizes, a touch panel selection automatically configures the settings, saving 10~30 minutes compared with manual adjustment.
Checking Cylinder Wear and Component Count
Cylinder wear is a maintenance consideration for pneumatic systems. The servo direct drive of the AMB 1500 S/T eliminates the cylinder wear associated with pneumatic drives, resulting in fewer wear parts and fewer minor breakdowns.
The AMB 1500 S/T reduces component count by 30% through direct drive. This figure refers to the reduction in the number of components in the drive system.

Genuine Korean-made LS components eliminate reliance on overseas parts supply. In addition to the drive system's wear characteristics, replacement parts sourcing is based on domestically manufactured components.
Current control incorporates Korea's first overload prevention control system. It monitors servo motor load in real time and cuts off current when an overload is detected. This protective function safeguards the machine independently of its energy-saving features.

Frequently Asked Questions
Q. Does approximately 4kW refer to the compressor specification?
Approximately 4kW refers to the power consumption of the AMB 1500 S/T.
Q. If no compressor is required, does that mean there are no pneumatic specifications?
The product specifications separately list an operating air pressure of 4~6kg/cm and Korean-made pneumatic components. These pneumatic specifications are provided alongside the description of the servo drive system.

Q. Does the 30% reduction in component count also refer to power savings?
The 30% reduction in component count refers to the components used in the direct drive system. The servo drive reduces power consumption by 30~40% compared with pneumatic systems.
Including your line configuration, box dimensions, and throughput requirements in your quotation inquiry helps us provide an accurate quote. Please submit inquiries through the website inquiry form. We respond within 1~2 business days.

JS SYSTEM handles design, manufacturing, and after-sales service directly in Korea, with service performed by the manufacturer's own engineers. Its slogan is “The people who build it take responsibility to the end.” The website features videos of the AMB 1500 S/T operating on a production line: a 60-second highlight and the full 9-minute 31-second video.