High-Speed Processing for Mass Production Lines Enabled by Continuous Banding Mode
In mass production lines, a banding system that can respond continuously to various box conditions is more important than simply having fast equipment. AMB 1500 S/T from JS SYSTEM supports four banding modes: dual banding, single banding, offset banding, and auto-setting. With a processing speed of 28 cycles/min and Korea's first full-servo automatic-control auto-setting system, it improves the efficiency of continuous processes. Even in production environments where box sizes change frequently, box transfer and banding speed can be adjusted, securing both high speed and operational stability.
Top Speed in the Industry
Designed for production lines focused on continuous processing
Banding Modes
Dual banding, single banding, offset banding, and auto-setting
Energy Savings
Operational efficiency based on 4 kW power consumption
Designed & Manufactured in Korea
One-stop service for development, manufacturing, and after-sales support
Why Four Banding Modes Are Advantageous for Continuous Production
In continuous banding processes, selecting the appropriate mode according to product characteristics and line conditions is more important than processing every box in the same way. Single banding is suitable for processes requiring basic strapping, while dual banding is effective for boxes that need more strapping points. Offset banding can be used when the strapping position must vary, and auto-setting is advantageous for reducing the burden of changing settings on lines handling mixed box sizes. AMB 1500 S/T can process boxes up to 1,500 × 1,300 mm and as small as 400 × 200 mm, expanding the operating range of continuous lines from large boxes to relatively small boxes.
| 항목 | Banding Mode | Key Advantages for Continuous Production Lines |
|---|---|---|
| Single Banding | Basic strapping | Suitable for maintaining fast flow in standard processes. |
| Dual Banding | Dual strapping | Expands response flexibility during continuous processing by increasing strapping points. |
| Offset Banding | Offset-position strapping | Used when the strapping position must vary depending on box conditions. |
| Auto-Setting | Automatic condition response | Reduces the burden of setting changes on lines handling mixed box types. |
Single Banding
Banding Mode
Basic strapping
Key Advantages for Continuous Production Lines
Suitable for maintaining fast flow in standard processes.
Dual Banding
Banding Mode
Dual strapping
Key Advantages for Continuous Production Lines
Expands response flexibility during continuous processing by increasing strapping points.
Offset Banding
Banding Mode
Offset-position strapping
Key Advantages for Continuous Production Lines
Used when the strapping position must vary depending on box conditions.
Auto-Setting
Banding Mode
Automatic condition response
Key Advantages for Continuous Production Lines
Reduces the burden of setting changes on lines handling mixed box types.
Key Indicators Supporting High-Speed Continuous Production
Korea's first full-servo automatic-control auto-setting system enhances setup responsiveness for continuous processes.
Equipped with a stable control configuration using 10 servo units (2.6A × 9 = 13.4A) with Korean-manufactured LS components.
Production line operational stability is ensured through the application of Korea's first overload protection control system.
Box transfer and banding speed can be adjusted for operation tailored to line conditions.
Field applicability is enhanced with Korean-manufactured pneumatic components at 4–6 kg/cm² and a 220V 50/60Hz power supply.
Key Considerations from the Perspective of Mass Production Line Operation
AMB 1500 S/T is not equipment that emphasizes speed alone. It was designed to secure practical operational efficiency on continuous production lines by combining 28 cycles/min processing performance, four banding modes, 30–40% energy savings, and a 100% Korean design and manufacturing system. Under the principle that the maker takes responsibility through to the end, JS SYSTEM provides one-stop services for development, manufacturing, and after-sales support.
Mode Selection Consultation
If you are unsure which banding mode is suitable, please send us product photos and specifications. We will recommend the optimal mode.