Between Overtime and Delivery Deadlines, the AMB 1500 S/T Transforming Manufacturing Sites
In manufacturing sites, the delivery date is not just a schedule but a standard of trust. The problem is that as deadlines become tighter, bottlenecks occur in the packaging and shipping processes, and that burden ultimately leads to overtime. JS SYSTEM understands this reality well. Under the slogan, "The people who make it take responsibility to the end," we propose a workflow that reduces the burden of repetitive tasks and enables more stable deadline response through the AMB 1500 S/T, an Automatic Inline Strapping Machine tailored to domestic production sites.
Up to 28 bundles per minute
Rapidly processes box transfer and banding operations to improve deadline response capability.
Energy savings
Helps reduce the operational burden at sites requiring long hours of operation.
Power consumption
A specification designed with both productivity and power efficiency in mind.
Domestic design and manufacturing
Enhances response speed through a domestic one-stop service for development, manufacturing, and after-sales service.
As delivery pressure increases, production sites tend to inspect once more, bind once more, and verify once more. When this process is prolonged, pre-shipment waiting time increases and operator fatigue rises as well. The AMB 1500 S/T supports box sizes from a maximum of 1500 x 1300 (mm) down to a minimum of 400 x 200, and offers dual banding, single banding, eccentric banding, and auto-setting modes. Even when box conditions vary, it enables flexible on-site response, making it suitable for reducing process delays that lead to additional nighttime work.
Full-servo automatic control auto-setting
Designed with Korea's first full-servo automatic control auto-setting to reduce the burden of changeovers and setup.
10 servo units applied: LS domestic, 2.6A x9=13.4A
Korea's first anti-load control system applied
Excellent banding tension and stable banding performance
Box transfer/banding speed adjustable
Power supply 220V, 50/60Hz / Pneumatic 4~6kg/cm, domestically made pneumatic components
Key Indicators for Deadline Response
Overtime at production sites has often been addressed by relying on people's endurance. However, as competition over delivery deadlines intensifies, what is needed is not a way to work longer, but equipment that maintains workflow more consistently. The AMB 1500 S/T is designed for inline processes based on a stable structure of approximately 1,500kg and dimensions of 2100 x 2600 x 1900 (mm), delivering practical operational advantages such as a processing capacity of 28 cycles/min and 30~40% energy savings. Above all, JS SYSTEM focuses on reducing site downtime by connecting domestic development, domestic manufacturing, and domestic after-sales service in one integrated system. This is precisely why the final support for meeting delivery dates should not be people's overtime, but predictable automation.
On-Site Support Information
JS SYSTEM (Jieiseu System) provides a domestic one-stop service for development/manufacturing/after-sales service. For inquiries, contact 010-9897-9834, make@jssys.work, or https://jssys.work.
Factory Tour
You can visit the JS SYSTEM manufacturing site in person to see the banding machine production process.